#oscilloscopes 2/2

Sep 10, 20131 min read

FAQ# 27: Why is PDN measured using a VNA and not an oscilloscope?

Steve Sandler Answers Your PDN Questions (Power Electronics’ Q&A Series) Power Electronics received a question about why PDN is measured...

Sep 4, 20121 min read

Making Ripple Measurements

Making ripple measurements has traditionally been using an oscilloscope. For a number of technical reasons, an oscilloscope, in general,...

Aug 20, 20121 min read

Sharpen Rising and Falling Edges

Wherever you find a digital control signal, you find sharp rising and falling edges that need characterization. These edges occur on...

Aug 6, 20121 min read

Use A Signal Analyzer To Measure Power Supply, Regulator, and Reference Noise

Oscilloscopes often are used to measure power supply, linear regulator, and reference noise. Since an oscilloscope has a sensitivity in...

Jul 9, 20121 min read

Essential Test Adapters for Your Network / Impedance Analyzer

The network analyzer, sometimes referred to as a Frequency Response Analyzer (FRA) is a common piece of equipment in most of our labs...

Jun 22, 20121 min read

Effectively Using the EM-6992 Near Field Probe Kit to Troubleshoot EMI Issues

The EM-6992 Probe Kit includes three magnetic (H) field and two electric (E) field passive, near-field probes and an extension handle...

May 24, 20121 min read

Troubleshooting EMI: Use Versatile Instrument And Preamp To Search For Embedded Noise

Most engineers do not have convenient access to the equipment necessary for electromagnetic compliance (EMC) or electromagnetic...

Jun 9, 20111 min read

Powering RF and Microwave Systems

RF/microwave design engineers faced with developing effective power circuits for a system require more complete data sheets, appropriate...