probes | Picotest Online

May 4, 20222 min read

How Oscilloscopes Will Evolve Over the Next 5 Years

Signal Integrity Journal Webinar Series Title: How Oscilloscopes Will Evolve Over the Next 5 Years Available on demand Length: 1 hour, 1...

Mar 9, 20221 min read

Ask the Experts: Getting Power Integrity Right

The push to minimize device size, with lower voltages and higher frequencies, means power quality is more important than ever. The higher...

Jan 25, 20222 min read

How Fast is the Switching Speed of a GaN Switch?

by Steve Sandler How fast is the world’s fastest GaN switch? It is an interesting question, and maybe is mostly wanted for bragging...

Jan 10, 20221 min read

Measuring the Bulk Dielectric Constant (Dk) on a Microstrip with a TDR

by Benjamin Dannan and Steve Sandler Most modern circuit designs depend on accurate logic signals at the logic receiver. This assurance...

Dec 27, 20211 min read

Cable Shield Resistance Issue in a 2-port Impedance Measurement

November 15, 2021 Steve Sandler For this extreme measurement example, I selected a simple problem that has been widely published by...

Sep 30, 20211 min read

DesignCon Digital 2021

October 5 & 6, 2021 "This online event from the producers of DesignCon features an education program with on-demand webinars presented by...

Sep 29, 20211 min read

EDI CON Online 2021

Technical Session Available on demand The Influence of Connectivity on Low Impedance Measurements Presented by: Steven M Sandler,...

Sep 9, 20211 min read

Picotest 2-port Probe Impedance Measurements

By Brian Hostetler – HPE, Inc. This document explains the measurements made on a few different power rails on a printed circuit board...

Sep 9, 20212 min read

App Note: NISM using the P2102A Probe and E5061B VNA

By Benjamin Dannan and Steven Sandler, Picotest.com Control loop stability is critical to the performance of all systems, as it...